Installation manual for BMW F22 F45 Navigation GPS Android screen replacement

Installation for BMW F22 F45 Navigation GPS Android screen replacement

The Android Screen navigation GPS system for BMW 2 series F22/ Active Tourer(F45)/ Gran Tourer(F46) (2013-2016), you can order [B202]  from our website.

Attention:
1. This product fits for BMW 2 Series F22 / Active Tourer (F45)/Gran Tourer (F46) with an original 6.5 inch or 8-inch screen.

2. This product fits for NBT system with 6 PIN LVDS

How to replace factory BMW 2 series active tourer (F45)/ Gran Tourer (F46) with aftermarket navigation Android Screen?

Downlaod the installation wire-diagram as below:

Installation steps:

1: Before installation    2, Remove the Radio control panel

3: Remove 2 screws and take out the factory radio head unit   4: Remove all cables on the back of factory radio head unit

5: Remove the trim panel   6: Remove the connections on the back of the trim panel

7: Remove 2 screws in the bottom of factory monitor   8: Take off the factory monitor and remove the LVDS Cable from factory head unit

9, Connect our power cable (male) to factory power harness  10, Connect the power cable(female) to factory radio head unit

11, Run the power (for the android head unit) and USB, GPS antenna cable to the back of android screen    12, Connect the power cable/USB/GPS antenna & LVDS cable to our screen and install the android screen.

13, Connect the AUX cable (one side connect to the AUX port in our power cable, another side connect to the port under the armrest box)   14,  Recover the central console, and installation is done.