Installation for BMW X1 F48 Navigation GPS head unit

Installation for BMW X1 F48 Navigation GPS head unit

Replacing factory BMW X1 F48 (2016-2018) auto radio and CD system with
aftermarket navigation Android screen is popular in recent years.

No matter you have a For BMW X1 F48(2016-2017)Original NBT System, Or For BMW X1  F48(2018) Original EVO system, you can install the Android screen in the same way.

bmw x1 f48 android navigation

    If your car is BMW X1 F48 (2016-2017), the factory with NBT system, then please order [B209]


    If your car is BMW X1 F48 (2018), the factory with EVO system, then please order [B509]

     PS: If your car with factory EVO menu, and it is a touch screen, you need to tell us this situation, because we need to use different hardware and software for it, read more

     

    Downlaod the installation wire-diagram (CCC CIC NBT) as below:

     

     

    Downlaod the installation EVO wire-diagram as below:

     

    Installation steps:

    1: Before installation 2, Remove the Air outlet panel

    BMW X1 navigation installation start here- remove the air-outlet panel

     

    3: Before pulling out the Air outlet panel, you need to remove the AC panel in the bottom 4, Remove the AC panel

    bmw x1 navigation installation step 3: remove the AC panel

     

    5, Remove the 2 screws and take out the factory head unit 6, Remove the 2 screws and take out the factory screen

    bmw x1 navi installation : remove the screws and take out the head unit and factory display


    7: Remove the LVDS connector from Factory screen 8: This factory LVDS(6 pins) connect to our android screen

    remove the factory LVDS connector from bmw x1 original screen

     

    9: Remove the car original screen bracket 10: replaced it with our screen bracket

    remove the bmw x1 original base braket and replace it with our oem braket

     

    11, After removed 2 screws (step 5), now remove the factory harness from the back of Factory CD head unit

    remove all the exsiting harness from the original head unit

     

    12, Our wire connections showed as below photo:

    wire diagram for bmw x1 navigation installation

    A: Connect our power cable to factory CD head unit B: Connect our power cable to the factory power harness

    connect our power cables to factory harness and the Head unit

     

    C, Connect the Power cable/LVDS/GPS antenna to the back of our android screen 13: Install the GPS antenna

    connect all the cables to the back of our android screen and location the gps antenna

     

    14, Connect the AUX [ ps: If the car from 2017-2018 with EVO menu, the sound go via USB, thus, no need to connect AUX) 16, Connect the AUX (under armrest box )

    connect the aux cable, so that to have the sound output


    15, Double check the wire connection and power on, and test all functions before recovering the car dashboard.

    check the wire connections and recover the dashboard, the installation for bmw x1 navigation is finished







     

    Comments

    0 comments

    Write a comment

    Comments are moderated